We use the GERSTEL MultiPurpose Sampler, with its huge range of unique accessories, to automate the processing of your samples.

This gives seamless integration with Agilent Technologies’ GC and GC-MS platforms and Syft Technologies' SIFT-MS instruments.
If you are involved in analytical R&D, you just don’t know where your research will lead, or what you may have to do tomorrow.

For sample preparation, automation may well be important to you and you will certainly benefit from the great flexibility the GERSTEL MultiFlex MPS gives you.
AutoPrep solutions, based upon the GERSTEL MPS are built with three things in mind: dependability, throughput and low consumable costs.

All have been tested in our laboratory and come with unlimited application support.
SIFT-MS joins GC-MS and LC-MS as one of the three essential tools that every analytical chemist should have.

SIFT-MS measures the concentrations of volatile substances (organic and inorganic) simply, directly and in real time.
The CF200 Robotic Centrifuge is capable, compact and integrates full with the GERSTEL MultiPurpose Sampler.

The CF200 can process up to six samples simultaneously for maximum productivity.
Anatune knows the importance of excellent support.

From your perspective, anything that stops you from working efficiently is a problem.

We aim to have a fix - whatever is getting in your way!

Our applications team have years of experience gained by working in analytical laboratories of all types.

They know the instruments we sell inside out and will find sensible solutions to to the analytical challenges you face.
Training is an investment and you can never have too much of it!

When your staff are well trained in the operation of an instrument, your return on investment is at its highest.

We are here to help this happen.
We offer preventative maintenance to keep your instruments working and a fast response if they stop.

Our support engineers are all experienced analysts and factory trained to support our products.
There are times when it is good to be able to call on some extra help or advice.

If you have a problem, we are always pleased to help.

Help Credits let you plan for when the unforeseen happens.
Search for and download brochures, application notes, presentations and posters.
Download PDF copies of product literature for the products we sell.
Search here for recent application notes from Anatune and our partners.
Download copies of recent presentations given by the Anatune team.
Here you can download copies of recent posters presented by the Anatune team and our partners.
We like to share our knowledge and expertise.

Become part of Anatune's growing online community and see what you can learn.

Subscribe to our blog and social media channels to keep abreast of the latest news, events and application notes.
We regularly run in-house workhops so customers can experience what we do first hand.

Find out more about our upcoming events.
We organise our own events and attend many others.

We love to talk with our customers face-to-face so, if you are attending an event, let us know and we can arrange to meet.
Let us keep you up-to-date with all the latest and greatest in the wonderful World of chromatography and mass spectrometry
Read our Blog!
Who we are, what we do and what we believe is important.

How you can become a member of the team.
We have built strong, long-term relationships with customers resulting in repeat business and an unbeatable reputation for reliability and trust.

Here's what they say about us...
Our first priority is to maintain a great team spirit and we only employ people with great attitudes.

We believe in continual learning and personal development. We train our staff well.

Find out more about them here.
Our role is to bring the World's best analytical technologies to laboratories in the UK and Ireland.

We do this in partnership with some great companies.
We are always on the look out for talent.

Find out more about current vacancies and careers at Anatune

Screening for Unknowns

For years, targeted analysis has been very much in vogue. Someone gives you a list of compounds to look for in a given matrix and you report how much of each that you can measure. Of course, there may be other compounds present that you (or someone else) ought to be interested in, but in targeted analysis, you just don’t see them (out of sight, out of mind).

Things are changing though; and, in the future, more analysts will have an obligation to look for and report everything of significance that we can see in our samples – not just the compounds on the target list.

Target analysis is a piece of cake in comparison to screening for unknowns, so things are about to get very interesting.

Accurate mass, mass spectrometry (GC and LC) is the “Gold Standard” when it comes to screening for unknown compounds, but as yet, relatively few labs have the instrumentation needed; and equally important, staff have yet to acquire the requisite skills in mass spectral interpretation.

As a consequence, for now, most labs will have to make the most of the instruments and skills they have to hand.

For GC amenable samples, this means that the best available option for screening “known unknowns” is to run GC/MS EI/CI in full scan, acquire spectra, then perform a NIST library search for the EI data. To get clean spectra, you would be well advised to use mass spectral deconvolution to overcome inevitable co-elution problems.

To the best of my knowledge, CI libraries don’t yet exist, so with these spectra, you still have to manually compare the spectra of unknowns to those available in books and literature for tentative identification.

Once you have a tentative identification, you then need to find a source of the pure compound (if available) and compare your unknown with full-scan spectra and the retention indices data for your standard. This takes time and is a lot of work.

Of course, this assumes that the set of unknown compounds you are working to identify, have all previously been characterised by someone else. When you come across an “Unknown, unknown” (something not previously reported in the literature or libaries) then you really are stuck – unless you have access to higher resolution mass spectrometers; tools that enables you to work out molecular formulae from first principles.

In the past, I have used this simplified approach for; screening “known unknowns” in environmental samples, for TIE and EDA based studies; identifying biologically active causative compounds following on from bioanalytical screening to target “hot” fractions.

I also worked closely with many researchers in Europe, on several DEFRA and EU Framework 6/7 funded projects, to standardise analytical techniques for doing this; making use of GC-MSD and a GC-Ion Trap, to generate both EI and CI, full scan, spectra.

This approach worked OK up to a point, but you are obviously limited by the content of libraries for spectral matching and by the commercial availability of standard compounds needed to confirm tentative identifications. I have copies of plenty of papers on this subject (to which I contributed to the analytical work).

In later studies, I also used a GCxGC TOF at the Free University of Amsterdam, Institute for Environmental Studies, working with Jacob de Boer and Pim Leonards.

Much of this work was published. The use of GCxGC-TOF-MS gave much more separation power and accurate mass capability.

The identification of unknowns by non-accurate mass LC-MS instruments, (usually ion traps) can be done by structural elucidation, however, this takes a long time and you need to have a very good understanding of collision-induced dissociation (CID) – which is tricky.

Libraries in LC-MS, (excluding TOF and Orbitrap), are poorly advanced, sparsely populated and quite unreliable due to the variety of conditions that can be applied to the both samples and standards (i.e. ion source conditions and chromatographic parameters).

For non-accurate mass LC-MS libraries to be useful, you must standardise both your ion source conditions and general analytical conditions, to ensure that you analyse both standards (to generate your libraries) and samples, under the same conditions.

As you may guess from what I have written here, I believe that accurate mass LC/TOF MS and/or GC TOF-MS are pretty much essential and need to be used in addition to existing nominal mass instruments, if you have to analyse for unknowns on a routine basis.

I know of plenty of good publications on this topic, mainly focused on the analysis of environmental samples (water, sediments, biota and the like). The determination is always pretty much the same but the approach to the initial sample prep will be different to that used in targeted analysis as you have to also have non-selective, “catch all”, sample prep methods.

If you are interested in discussing this further, please do not hesitate to contact me on +44 (0) 1223 279210, or email enquiries@anatune.co.uk.

Go back to Blog Homepage